Gbs-elektronik MCA-527 Firmware Commands Manual de usuario descargar pdf (Pagina 4)

MCA527

The Ethernet communication uses the UDP protocol with the destination port 50000. The preamble is

prefixed 2 bytes (0xA5, 0x5A) for intern byte alignment within the MCA527.

The MCA527 can be configured to use a fixed customized IP address or to obtain the IP address

automatically from a DHCP server or if not available, to use Zero Configuration Networking (also named

Automatic Private IP Addressing).

While the MCA527 is writing a file, only the query commands and CMD_STOP command are executable. All

other commands are ignored and response with an error value. The file writing state is returned by

CMD_QUERY_STATE527_EX.

MCA Reset Command:

Command name

CMD_INIT

Compatibility Identical to the MCA166 command.

Execution right Necessary

Description All MCA Parameters will be reset to their initial state and the spectra are cleared. The measurement

is aborted. The preamplifier power and the high voltage are turned off!

Format integer integer integer long integer

Parameter preamble command 0 0 end flag

Byte string (HEX) A5 5A 41 00 00 00 00 00 00 00 B9 9B

MCA Clear Command:

Command name CMD_CLEAR

Compatibility Differs to the MCA166 command.

Execution right Necessary

Description Depending on the parameter: CLEAR_MEASUREMENT_DATA = 0 or 1

CLEAR_ROI = 2

CLEAR_ALL = 3

the command clears the measurement data, the ROI limits exclusively or all together. Before the

measurement data are cleared, a running measurement is immediately stopped.

Format integer integer integer long integer

Parameter preamble command clear 0 end flag

Byte string (HEX) A5 5A 44 00 clear 00 00 00 00 00 B9 9B

1 2 3 4 5 6 7 8 9 ... 53 54

Sin comentarios

Gbs-elektronik MCA-527 Firmware Commands Manual de usuario Pagina 4